2011-2015 Chevy/GMC 6.6L Duramax Diesel LML 5" DPF-sletting av løpsrør
€2.338,99
Artikelnummer: C138-B118~002
Kostenloser und schneller Versand
Sicherer und vertrauenswürdiger Handel
Det fjerner behovet for regelmessig service av DPF-en (rengjøring, utskifting)
En DPF-sletting vil fjerne muligheten for en DPF-feil som kan føre til dyre dieselreparasjoner
På grunn av mindre eksosmottrykk øker DPF-slettet eksosstrømmen og dermed motorens ytelse!
Sammen med en ECU-omlegging er det bevist at DPF-slettingen øker kraft og dreiemoment for alle kjøretøy
Spesifikasjoner:
Tilstand: 100 % splitter ny
Eksosrørmateriale: Rustfritt stål
Tykkelse: 2 mm
Innløpsdiameter: 5"
Passform:
For 2011–2015 Chevy/GMC 6,6L Duramax Diesel LML. Silverado og Sierra pickup-biler.
Pakken inkluderer:
Som vist på bildet
Fraktdetaljer:
Gratis frakt
Estimert leveringstid: 2–7 virkedager
Garanti:
60-dagers returrett: Kunder kan søke om retur innen 60 dager etter at de har mottatt produktet.
Ekspertstøtte døgnet rundt: Teamet vårt er tilgjengelig døgnet rundt for å hjelpe med eventuelle spørsmål eller bekymringer.
Customer Reviews
Good quality parts
wow, the car fully pops and crackles with a great exhaust note. Very happy.
2012-2018 Audi A6 C7/C7.5 A7 C7/C7.5 3.0T V6 Exhaust Racing Downpipes
Sounds alright make sure you have afm disabled, makes it deeper and more enjoyable but not as loud as you think it will make it. If you want loud you’ll have to do the resonator further back as well, as well as an issue of the pipe not being long enough to cut the flapper out so that’s another restriction. I welded mine open. Fit well after the muffler but the inlet pipe is a little smaller causing you to have to really tighten the exhaust clamp down to get it tight. Does not completely seal so there will be a slight leak around the edges unless you fix that with some welds or exhaust wrap/tape. But for 80 bucks it’s a good deal and the easiest way to diy it the right way.
This will take you about 20min to install. Super simple. YouTube has a great video step by step. Instructions that come with it you can't even read so don't try. Muffler shop will charge you about $150-$200 so this is much better option and if you trucks lifted it's even better.
