Modulo unità di controllo zavorra fari 1307329115 per Audi A4/S4

$37.78

SKU: C116-P100-A

Spedizione gratuita e veloce

Commercio sicuro e affidabile

Modulo di controllo ballast fari 1307329115 per Audi A4/S4

Caratteristica:
1: In conformità con le specifiche originali di fabbrica, si adatta perfettamente all'auto originale.
2: Possedere diverse macchine di prova per progettare parametri esatti e accurati per il nostro products.All Gli articoli sono stati testati per verificarne le prestazioni.
3: Realizzato con materiale di alta qualità, leggero, antiruggine, resistente allo scolorimento e durevole.
4: Prodotto aftermarket di qualità superiore.
5: Prestazioni stabili, elevata affidabilità, adatto a sostituire quello rotto.

Dettagli:
Condizione: 100% nuovo di zecca
Materiale: Metallo
Colore: mostrato nelle immagini
Codice articolo del produttore: Z1 307 329 115/1 307 329 098/1307329098
Codice ricambio intercambiabile: 1307329115 8E0907391B/8E0907391 B
Altri codici articolo: 1307329250, 1 307 329 293/1307329293
Tipo: Ballast per faro
Parte vintage: No
Tecnologia di illuminazione: Xenon, HID
Posizionamento sul veicolo: Anteriore, Sinistra, Destra
Tipo di montaggio: Sostituzione diretta

Compatibilità:
Per Cadillac DTS 2006-2008
Per Audi A4/S4 berlina e station wagon 2006-2009 (senza luci di svolta)
Per Audi A4/S4/RS4 Cabrio 2007-2009 (senza illuminazione della curva)
Per SAAB 9-7x 2006-2008
Per Volvo C30 2007-2011
Per Volvo C70 2006-2011
Per Volvo S40 2004-2007
Per Volvo V50 2005-2007

La confezione include:
1 pz Controllo di zavorra
[* Le istruzioni non sono incluse!]

Nota:
1. Prima dell'acquisto, si prega di controllare la descrizione o utilizzare lo strumento di ricerca per anno/marca/modello e i codici dei ricambi per confermare la compatibilità.
2. Si raccomanda l'installazione da parte di un professionista.

Customer Reviews

Based on 400 reviews
88%
(353)
7%
(27)
4%
(14)
1%
(2)
1%
(4)
K
KYOJOONG KIM

2006-2010 Volkswagen Passat B6 Front Crystal Clear Corner Turn Signal Park Lamp 3C0953042L

R
Röschel Reiner

Tail lights look sharp! My tail light was cracked so it would have cost me $85 to replace. I wanted LEDs anyway so for 200 got a new set. Were easy to install though had to refer to Utube as was mentioned in other reviews they don't come with instructions. Reviews also said not to use the wire harness that comes with it but to just use the original one. Mine was slightly corroded so wanted to change out but even though the seller said they fit, the ends are different. Mine is a 2016 chevy silverado and the end of the harness will only fit GMC. As this didn't keep me from using the lights, I didn't contact seller to see if they would make good on. Overall very pleased.

K
Kummer Rüdiger

The tail light fit and looked great! However, the blind spot sensor did not work. Since the only part that was damaged from my original tail light was the plastic housing lens, I was able to remove the old blind spot monitor sensor and replace it in the new one. Blind Spot Monitor is working perfect with no dealer needed for calibration.

L
Langella Jérôme

This fit and worked perfectly. All the holes and retainers lined up perfectly.

A
Alan Brazil

Great