Dodge Ram 2500/3500 6.7 Cummins del 2007.5-2012 4" Eliminazione DPF tubo di gara
€397,66
SKU: C138-B102~002
Spedizione gratuita e veloce
Commercio sicuro e affidabile
Caratteristica:
Elimina la necessità di effettuare la manutenzione del DPF a intervalli regolari (pulizia, sostituzione)
L'eliminazione del DPF eliminerà la possibilità di un guasto del DPF che potrebbe causare costose riparazioni del diesel
Grazie alla minore contropressione allo scarico, l'eliminazione del DPF aumenta il flusso di scarico e quindi aumenta le prestazioni del motore!
Abbinata a una rimappatura della centralina, la cancellazione del DPF ha dimostrato di aumentare la potenza e la coppia per tutti i veicoli
Dettagli:
Condizione: 100% nuovo di zecca
Materiale: acciaio inossidabile
Tipo: tubo di scarico da 4 pollici
Montaggio:
Per 2007.5 2008 2009 2010 2011 2012 Dodge Ram 2500/3500 6.7 Cummins Diesel
Pacchetto comprensivo di:
2x tubi
1x morsetto
Informazioni sulla spedizione:
Spedizione rapida gratuita.
Tempo di arrivo stimato: entro 3-6 giorni lavorativi.
Customer Reviews
2012-2018 Audi A6 C7/C7.5 A7 C7/C7.5 3.0T V6 Exhaust Racing Downpipes
Sounds alright make sure you have afm disabled, makes it deeper and more enjoyable but not as loud as you think it will make it. If you want loud you’ll have to do the resonator further back as well, as well as an issue of the pipe not being long enough to cut the flapper out so that’s another restriction. I welded mine open. Fit well after the muffler but the inlet pipe is a little smaller causing you to have to really tighten the exhaust clamp down to get it tight. Does not completely seal so there will be a slight leak around the edges unless you fix that with some welds or exhaust wrap/tape. But for 80 bucks it’s a good deal and the easiest way to diy it the right way.
This will take you about 20min to install. Super simple. YouTube has a great video step by step. Instructions that come with it you can't even read so don't try. Muffler shop will charge you about $150-$200 so this is much better option and if you trucks lifted it's even better.
Actually works!
Wasn’t a direct fit, but worked well with some tweaking. Also had to trim about 8” out of the middle section (comes with three sections) to meet length. One of the bends was slightly off for factory exhaust tips to align in bumper, but for the money it was fine.