Troisième feu stop LED pour Chevy Silverado 2007-2013

€50,95

UGS : C146-A263-B

Livraison gratuite et rapide

Échange sécurisé et fiable

Troisième feu stop à LED pour Chevy Silverado 2007-2013

Fonctionnalité:
1 : Conformément aux spécifications d'usine d'origine, parfaitement adapté à la voiture d'origine.
2 : Posséder différentes machines de test pour concevoir des paramètres précis et exacts pour nos products.All Les performances des articles ont été testées.
3 : Fabriqué avec des matériaux de haute qualité, léger, antirouille, résistant à la décoloration et durable.
4 : Produit de rechange de qualité supérieure.
5 : Performances stables, grande fiabilité, convient pour remplacer votre pièce cassée.

Détails:
État : 100 % neuf
Matière : plastique
Couleur : voir les images
Référence fabricant : 25890530
Numéro de pièce interchangeable : 25890530
Autre numéro de pièce : 25890530
Type : Feu stop
Couleur de la lumière : rouge/blanc
Technologie d'éclairage : LED
Remarque : Convient aux LED, non aux halogènes
Emplacement sur le véhicule : Arrière, partie supérieure
Type de montage : Remplacement direct

Compatibilité :
Pour Chevrolet Silverado 1500 2007-2013
Pour Chevrolet Silverado 2500 3500 HD 2007-2013
Pour GMC Sierra 1500 2007-2013
Pour GMC Sierra 2500 3500 HD 2007-2013
***Si vous n'êtes pas sûr, veuillez nous fournir le numéro VIN !

Contenu de l'emballage :
1 feu stop LED secondaire
[* Instructions non incluses !]

Note:
1. Veuillez vérifier la description ou utiliser l'outil de vérification année/marque/modèle et les numéros de pièces de rechange pour confirmer la compatibilité avant l'achat.
2. L'installation par un professionnel est recommandée.

Customer Reviews

Based on 377 reviews
88%
(332)
7%
(26)
3%
(13)
1%
(2)
1%
(4)
A
ANDREW PYE
Amazing

People at my dealership love them

K
Ken Atkinson

Perfect!!!

G
Gilmore Darren

My Ranger did not have a cargo light, to make this one work, I had to add a wire to the harness. Then I ran the other end across the underside of the headliner and finally to the dome light. There I used a red stakeon to put it under the interior dome light hot feed screw, it seems to work well. The foot print of the light is the same as my OEM one. The gasket will squish so that you get a perfect fit. The break light works as it did, cargo comes on with dome. To add to the harness, and avoid splicing you factory harness, you will need the small connector for your wire that will snap into the factory connector. I got lucky and happened to have one that fit.

K
Kon Maroulis

Thanks

D
Doc G
Z3 Fog Lights

Nice fog lights. Just like OEM. However, after about two weeks, left fog light lens fell off and could not find.