Lot de 2 coques de phares + colle pour Mercedes-Benz W230/R230 SL500 SL600 2003-08

3.577,55 Kč

UGS : C116-P052-A

Livraison gratuite et rapide

Échange sécurisé et fiable

Lot de 2 coques de phares + colle pour Mercedes-Benz W230/R230 SL500 SL600 2003-08

Fonctionnalité:
1 : Conformément aux spécifications d'usine d'origine, parfaitement adapté à la voiture d'origine.
2 : Posséder différentes machines de test pour concevoir des paramètres précis et exacts pour nos products.All Les performances des articles ont été testées.
3 : Fabriqué avec des matériaux de haute qualité, léger, antirouille, résistant à la décoloration et durable.
4 : Produit de rechange de qualité supérieure.
5 : Performances stables, grande fiabilité, convient pour remplacer votre pièce cassée.

Détails:
État : 100 % neuf
Matériau : ABS, plastique
Couleur : voir les images
Numéro de pièce du fabricant : Non applicable
Numéro de pièce interchangeable : Sans objet
Autre numéro de pièce : Sans objet
Type : Cache-objectif de phare
Couleur des verres : Transparent
Compatibilité universelle : Oui
Emplacement sur le véhicule : avant, gauche, droite
Type de montage : Remplacement direct

Compatibilité :
Pour Mercedes-Benz W230/R230 SL500 SL600 2003-2008

Contenu de l'emballage :
2 * Cache-objectif de phare (gauche + droite)
(afficher sous forme d'images)
[* Instructions non incluses !]
(Produits rigoureusement testés et de haute qualité)

Note:
1. Veuillez vérifier la description ou utiliser l'outil de vérification année/marque/modèle et remplacer les numéros de pièces pour confirmer la compatibilité avant l'achat.
2. L'installation par un professionnel est recommandée.


Informations sur la livraison :
Délai de livraison : 3 à 7 jours ouvrables.
Livraison rapide et gratuite.

Customer Reviews

Based on 376 reviews
88%
(331)
7%
(26)
3%
(13)
1%
(2)
1%
(4)
K
Ken Atkinson

Perfect!!!

G
Gilmore Darren

My Ranger did not have a cargo light, to make this one work, I had to add a wire to the harness. Then I ran the other end across the underside of the headliner and finally to the dome light. There I used a red stakeon to put it under the interior dome light hot feed screw, it seems to work well. The foot print of the light is the same as my OEM one. The gasket will squish so that you get a perfect fit. The break light works as it did, cargo comes on with dome. To add to the harness, and avoid splicing you factory harness, you will need the small connector for your wire that will snap into the factory connector. I got lucky and happened to have one that fit.

K
Kon Maroulis

Thanks

D
Doc G
Z3 Fog Lights

Nice fog lights. Just like OEM. However, after about two weeks, left fog light lens fell off and could not find.

A
Adam Mustafa

Very bright brake light