Luz LED para coche PHILIPS Ultinon Pro6000 blanca W21W 11065CU60 Genérico

$27.78

Código: C119-P002-J

Envío rápido y gratuito

Comercio seguro y confiable

Característica:
1: De acuerdo con las especificaciones originales de fábrica, combinación perfecta para el automóvil original.
2: Poseer diferentes máquinas de prueba para diseñar parámetros exactos y precisos para nuestro products.All Los artículos fueron probados para determinar su rendimiento.
3: Fabricado con material de alta calidad, ligero, antioxidante, resistente al color y duradero.
4: Producto de posventa de primera calidad.
5: Rendimiento estable, alta confiabilidad, adecuado para reemplazar el roto.

Detalles específicos:
Condición: 100% nuevo
Material: LED
Color: como se muestra en las imágenes.
Número de pieza del fabricante: Ultinon Pro6000 W21W11065CU60
Número de pieza de intercambio: Ultinon Pro6000 W21W11065CU60
Otro número de pieza: Ultinon Pro6000 W21W11065CU60
Tipo: LED-BLANCO [W21W]
Aplicación: Iluminación de señales e interiores.
Rango: Ultinon Pro6000
Certificación ECE: No
Vida útil: 000 horas
Voltaje: 12 V
Temperatura de color 000K Blanco
Flujo luminoso: 250 LM
Ubicación en el vehículo: Trasero
Tipo de ajuste: Reemplazo directo

Mueble:
Luz LED para coche BLANCA Ultinon Pro6000 W21W 11065CU60 Para PHILIPS

El paquete incluye:
2 bombillas Philips Ultinon Pro6000 W21W11065CU60
(mostrar como imágenes)
[*¡Las instrucciones no están incluidas!]
(Productos de alta calidad y estrictamente probados)>
Nota:
1. Verifique la descripción o utilice el buscador de año/marca/modelo y reemplace los números de pieza para confirmar la compatibilidad antes de comprar.
2.Se recomienda instalación profesional.

Información de envío:
Tiempo de entrega: 3-7 días hábiles.
Envío rápido gratuito.

Customer Reviews

Based on 400 reviews
88%
(353)
7%
(27)
4%
(14)
1%
(2)
1%
(4)
K
KYOJOONG KIM

2006-2010 Volkswagen Passat B6 Front Crystal Clear Corner Turn Signal Park Lamp 3C0953042L

R
Röschel Reiner

Tail lights look sharp! My tail light was cracked so it would have cost me $85 to replace. I wanted LEDs anyway so for 200 got a new set. Were easy to install though had to refer to Utube as was mentioned in other reviews they don't come with instructions. Reviews also said not to use the wire harness that comes with it but to just use the original one. Mine was slightly corroded so wanted to change out but even though the seller said they fit, the ends are different. Mine is a 2016 chevy silverado and the end of the harness will only fit GMC. As this didn't keep me from using the lights, I didn't contact seller to see if they would make good on. Overall very pleased.

K
Kummer Rüdiger

The tail light fit and looked great! However, the blind spot sensor did not work. Since the only part that was damaged from my original tail light was the plastic housing lens, I was able to remove the old blind spot monitor sensor and replace it in the new one. Blind Spot Monitor is working perfect with no dealer needed for calibration.

L
Langella Jérôme

This fit and worked perfectly. All the holes and retainers lined up perfectly.

A
Alan Brazil

Great