2015-2018 Audi A6 4G C7 izquierda/derecha/par luz trasera 5 pines exterior 4G5945095E 96E genérico

€94,66

Código: C146-A131-C

Envío rápido y gratuito

Comercio seguro y confiable

Característica:
1: De acuerdo con las especificaciones originales de fábrica, se ajusta perfectamente al coche original.
2: Poseer diferentes máquinas de prueba para diseñar parámetros exactos y precisos para nuestro products.All Los artículos fueron sometidos a pruebas de rendimiento.
3: Fabricado con material de alta calidad, ligero, antioxidante, resistente al color y duradero.
4: Producto de posventa de calidad superior.
5: Rendimiento estable, alta fiabilidad, adecuado para reemplazar el que esté roto.

Detalles específicos:
Estado: 100% nuevo
Material: Plástico
Color: se muestra como en las imágenes
Número de pieza del fabricante: 4G5945095E, 4G5945095D, 4G5945095C, 4G5945096E, 4G5945095D, 4G5945096D
Número de pieza de intercambio: 4G5945095E, 4G5945095D, 4G5945095C, 4G5945096E, 4G5945095D, 4G5945096D
Otros números de pieza: 4G5945095E, 4G5945096E
Tipo: Conjunto de luz trasera
Transmisión: Manual
Tecnología de iluminación: LED
Tipo de montaje: Tornillos
Ubicación en el vehículo: Trasera, izquierda, derecha, exterior
***Nota: No es compatible con la versión estadounidense.
Tipo de ajuste: Reemplazo directo
Pin: 5 pines

Mueble:
Para Audi A6 4G C7 2015-2018 (No apto para versiones Avant ni Wagon)

El paquete incluye: (Como usted prefiera)
1 x Luz trasera exterior (izquierda)
1 x Luz trasera exterior (derecha)

Información de envío:
Plazo de entrega: 3-7 días laborables.
Envío rápido gratuito.

Customer Reviews

Based on 377 reviews
88%
(332)
7%
(26)
3%
(13)
1%
(2)
1%
(4)
A
ANDREW PYE
Amazing

People at my dealership love them

K
Ken Atkinson

Perfect!!!

G
Gilmore Darren

My Ranger did not have a cargo light, to make this one work, I had to add a wire to the harness. Then I ran the other end across the underside of the headliner and finally to the dome light. There I used a red stakeon to put it under the interior dome light hot feed screw, it seems to work well. The foot print of the light is the same as my OEM one. The gasket will squish so that you get a perfect fit. The break light works as it did, cargo comes on with dome. To add to the harness, and avoid splicing you factory harness, you will need the small connector for your wire that will snap into the factory connector. I got lucky and happened to have one that fit.

K
Kon Maroulis

Thanks

D
Doc G
Z3 Fog Lights

Nice fog lights. Just like OEM. However, after about two weeks, left fog light lens fell off and could not find.