2011-2012 BMW Serie 3 E90 E91 E92 E93-335i N55 Bajante de escape del motor
€143,77
Código: C138-B060~003
Envío rápido y gratuito
Comercio seguro y confiable
Característica:
El tubo de bajada del BMW 335i está mecanizado a partir de acero inoxidable de alta calidad T304 y soldado con TIG en casa.
El decat se fabrica en el Reino Unido y las bridas se cortan con láser entre 10 y 12 mm.
Respuesta del acelerador más nítida debido al carrete más rápido del turbo
Aumentos de potencia notables y un sonido de escape mucho más agresivo que suena realmente increíble.
Produce temperaturas más bajas y menor contrapresión del escape gracias al alivio del turbocompresor. Además, aumenta la carga del cilindro.
También hay un ahorro de peso sustancial en comparación con el convertidor catalítico de fábrica.
Mandril doblado para un mejor flujo de gas y un tamaño interno máximo para garantizar el máximo rendimiento sin pérdida de torque de rango medio.
Detalles específicos:
Condición: 100% nuevo
Tipo de material: acero inoxidable
Mueble:
Para BMW Serie 1 E82 E88-135i Motor N55 2011-2012
Para BMW Serie 3 E90 E91 E92 E93-335i Motor N55 2011-2012
El paquete incluye:
1x tubo
2x Juntas
5 tornillos
Información de envío:
Tiempo de entrega: 3-8 días hábiles.
Envío rápido y gratuito desde California.
Customer Reviews
2012-2018 Audi A6 C7/C7.5 A7 C7/C7.5 3.0T V6 Exhaust Racing Downpipes
Sounds alright make sure you have afm disabled, makes it deeper and more enjoyable but not as loud as you think it will make it. If you want loud you’ll have to do the resonator further back as well, as well as an issue of the pipe not being long enough to cut the flapper out so that’s another restriction. I welded mine open. Fit well after the muffler but the inlet pipe is a little smaller causing you to have to really tighten the exhaust clamp down to get it tight. Does not completely seal so there will be a slight leak around the edges unless you fix that with some welds or exhaust wrap/tape. But for 80 bucks it’s a good deal and the easiest way to diy it the right way.
This will take you about 20min to install. Super simple. YouTube has a great video step by step. Instructions that come with it you can't even read so don't try. Muffler shop will charge you about $150-$200 so this is much better option and if you trucks lifted it's even better.
Actually works!
Wasn’t a direct fit, but worked well with some tweaking. Also had to trim about 8” out of the middle section (comes with three sections) to meet length. One of the bends was slightly off for factory exhaust tips to align in bumper, but for the money it was fine.