2002/9-2005/9 BMW Serie 5 E61 530D M57N Diesel Motor Egr en blanco BLANKING KIT

€30,77

Código: C183-A213~003

Envío rápido y gratuito

Comercio seguro y confiable

Descripción:
Este kit de extracción de válvula EGR le permite quitar completamente el sistema EGR del motor.
El kit incluye una placa ciega de 5 mm de espesor y una junta de alta temperatura para el colector de escape de la placa ciega.
Esto elimina el tubo de extensión EGR flexible que es propenso a agrietarse.
El turbocompresor arranca rápidamente a una velocidad más baja (el retraso del turbocompresor es pequeño)
Prevenir la deposición de carbón en el colector de admisión y los puertos
Aceleración en ralentí más estable y mejor economía de combustible
El aceite de motor limpio ayuda a prolongar la vida útil del motor.
Reduce la salida de humo (reducción de humo al sacarlo)

Detalles específicos:
Condición: 100% nuevo.
Material: aleación de aluminio, acero inoxidable.

Mueble:
Para motor BMW: 3.0 M57N2
Para Serie 3 E46, 330d, M57N, 2002/9-2006/8
Para Serie 5 E60, 530d, M57N, 2002/9-2005/9
Para Serie 5 E61, 530d, M57N, 2002/9-2005/9
Para Serie 7 E65, 730d, M57N, 9/2002-2005/2
Para BMW x3 E83:3.0d M57N, 9/2002-2/2005
Para BMW x5 E53, 3.0d, M57N, 2002/9-2006/9.
Este proyecto solo es aplicable a vehículos diésel (no aplicable a vehículos de gasolina)

Contenido del paquete:
1 x Kit de obturación de EGR

Nota:
No incluye instrucciones. Se recomienda encarecidamente la instalación profesional.


Información de envío:
Envío rápido gratuito.
Tiempo estimado de llegada: dentro de 3-6 días hábiles.

Customer Reviews

Based on 1182 reviews
65%
(774)
23%
(266)
6%
(72)
2%
(23)
4%
(47)
A
Andreas
Värdelös frakt och dålig passform

Jag chattade och kollade så frakten skulle gå fort och om delarna fanns på lager, det gjorde dom och skulle finnas hos mig om 3-6dagar, det tog 15dagar innan paketet kom, kul att ha en isär skruvad bil och vänta på delar, passformen hade dessutom en del att önska, tyvärr både första och sista gången jag handlar utav detta företag

D
David Bruce
good part but miss-aligned mounting tabs

This kit installed just fine, except for the two mounting tabs and the flared end. We had to bend the the tabs to fit. It was a pain in the ass because there is very little room to maneuver here. The flared end was a bit of a challenge as well where the pipe meets to boot for the intercooler input. I was concerned about the tightness of the boot so I made a slight mod to fix that and used 2 band clamps. It would have bee better if the pipe was flared and then had at least 1 inch of straight on the end of it. All in all, it is now working fine.

M
Mateo Mac

2014-2017 1500 Dodge Ram 3.0L EcoDiesel EGR Valve & Cooler Delete Kit

J
James Lovis
Idle Surge Fixed!

Purchased to replace and delete my broken IACV and worked a treat. No more idle bounce, revs nice and happy and looks pretty good too.

Side note for the manufacturer; Different anodised colours would be a very cool addition in the future.

l
laura sandrin
EGR BMW E87

Molto soddisfatto del prodotto ,ottima resistenza e facile da montare ,venditore serio ed affidabile ,lo consiglio