Bushing Installation Tool for Hendrickson Turner Intraax Wide Bushing S21307
€332,55
SKU: C104-A001
Free & Fast Shipping
Secure & Trusted Trade
Feature:
For use with Hendrickson Tri-Functional Wide Beam Bushing Kits
Ensure that threads on tool are well lubricated before and during use to avoid damaging threads
Bushing Installation Tool for Hendrickson Replace Part # S21307, E9575, TRB5912-T Automann
This kit will easily remove and install the Hendrickson Intraax Tri-Functional bushing while the suspension remains on the trailer. Made to service most Hendrickson, Hendrickson Turner, Watson Chalin, and Automann bushings
Specifications:
Condition: 100% Brand New
Manufacturer Part Number:S21307
Bushing Type:Wide Beam Bushing
Fitment:
For BWP HE9AA-T
For Dayton 334-936
For Euclid E-9575
For Hendrickson S-21307
For Meritor R309575
For Sirco SH2034
For Tiger Tool 15040
Package included:
1 x Bushing Installation Tool
Removal of Bushing：
1.Scribe the bushing orientation on the beam tube and compression tube.
2.The spring pins are not required to line up with the bushing holes during removal.
3.Tighten retaining nuts to remove slack. Thread on hammer adapter in the event the bushing becomes seized. Hook up hydraulics and begin removal operation.
4.After each 2 inch stroke, re-tighten nuts to take up slack. (Most bushing will require 3-4 adjustments)
Installation of Bushing：
1.Lubricate the bushing and insert the bushing into compression cylinder.
2.Place the plunger on top of the bushing, align the mark on the bushing with the mark on the plunger. The 4 corresponding pins to the bushing type you are installing should seat into the bushing.
3.Tighten retaining nuts to remove slack. Thread on hammer adapter in the event the bushing becomes seized. Confirm the plunger is aligned with the scribed mark on the beam tube and the pins are still engaged in the bushing. Hook up hydraulics and begin installation operation.
4.After each 2 inch stroke, retighten nuts to take up slack. (Most bushing will require 3-4 adjustments)
Shipping Information:
Free Quick Shipping.
Estimated Time of Arrival: within 3-6 working days.
Customer Reviews
Hello, thanks for sending the tcm but unfortunately it didn’t work. I sent the part to you guys for a refund, but I haven’t heard anything. Please advise .
Tcm module transmission for my focus 2014 SE i installed it myself and works perfectly
It came pre flashed but you still need to do the clutch adaptive learning so you'll need the cable and I got a free trial membership from Forscan. Got it replaced, check engine light went away and is on its way to Tennessee from Arizona.
It's been months since installation and it certainly fixed the check engine light, driving is smoother now after the part change. The only downside is that driving still randomly gives a similar hesitation feeling when gears shift up like it did with the previous part. I'm no mechanic so I wouldn't know if it's because of another failing car part but I'm going to point the finger at this part. Since this is still much much cheaper than getting it from the dealership, I'd say get this part still and deal with the occasional gear hiccup.
Buying these four cams locally. We're around $1,000 so I took a gamble on these and I'm very impressed. So far the engine runs very smooth. I have over 10,000 mi on them at this time I guess we'll see how long they last. I do courier work. I put about 170,000 plus miles on my car every year so it won't take long to see if these last a while
I have 27,000 mi on these cams now and running as good as the day I installed them