Dodge Ram Cummins 6.7L ab Baujahr 2013 4" Taxi & Chassis-DPF-Entfernung Auspuffrohr

€412,55

Artikelnummer: C138-B104

Kostenloser und schneller Versand

Sicherer und vertrauenswürdiger Handel

Besonderheit:?
Dadurch entfällt die Notwendigkeit, den DPF in regelmäßigen Abständen zu warten (Reinigung, Austausch).
Durch den Ausbau des Dieselpartikelfilters (DPF) wird die Möglichkeit eines DPF-Ausfalls beseitigt, der teure Dieselreparaturen verursachen könnte.
Durch den geringeren Abgasgegendruck erhöht die DPF-Entfernung den Abgasdurchsatz und steigert somit die Leistung Ihres Motors!
In Kombination mit einer ECU-Neuprogrammierung führt die DPF-Entfernung nachweislich zu einer Steigerung von Leistung und Drehmoment bei allen Fahrzeugen.

Einzelheiten:
Zustand: 100% Neu
Material: Edelstahl
Einlassdurchmesser: 4"

Passform:
Für Dodge Ram Cummins 6.7 Cab ab Baujahr 2013 & Chassis

Paketinhalt:
5x Rohre
3x Klemmen

Versandinformationen:
Kostenloser und schneller Versand.
Voraussichtliche Ankunftszeit: innerhalb von 3-6 Werktagen.

Customer Reviews

Based on 865 reviews
42%
(359)
42%
(361)
9%
(80)
3%
(30)
4%
(35)
B
Billy Reilly
Haven’t received my item

Have already sent a email but now just being ignored

D
Devin Smith

2012-2018 Audi A6 C7/C7.5 A7 C7/C7.5 3.0T V6 Exhaust Racing Downpipes

J
Jose Hernandez

Sounds alright make sure you have afm disabled, makes it deeper and more enjoyable but not as loud as you think it will make it. If you want loud you’ll have to do the resonator further back as well, as well as an issue of the pipe not being long enough to cut the flapper out so that’s another restriction. I welded mine open. Fit well after the muffler but the inlet pipe is a little smaller causing you to have to really tighten the exhaust clamp down to get it tight. Does not completely seal so there will be a slight leak around the edges unless you fix that with some welds or exhaust wrap/tape. But for 80 bucks it’s a good deal and the easiest way to diy it the right way.

R
Röschel Reiner

This will take you about 20min to install. Super simple. YouTube has a great video step by step. Instructions that come with it you can't even read so don't try. Muffler shop will charge you about $150-$200 so this is much better option and if you trucks lifted it's even better.

R
Röschel Reiner

Actually works!