2004-2014 BMW 5-SERIE E60/E61 M57 DIESEL Udstødningsnedløbsrør
$109.88
SKU: C138-B024~003
Gratis og hurtig levering
Sikker og pålidelig handel
Funktion:
1. Forbedr motorens ydelse og effektivitet, giv dig ekstra hestekræfter og øger drejningsmomentet
2. Slanger med stor diameter og frit flow for ubegrænset flow, hvilket gør udstødningsluften jævn, designet til højtydende racing
3. Lavet af højkvalitets 16-gauge T-304 rustfrit stål med computeriserede dornbøjninger
4. Alle samlinger er TIG-svejsede for at forhindre revner og slid
5. CNC-maskineflange for MAKSIMAL styrke og holdbarhed
6. Flanger forkromet for korrosionsbestandighed
Specifikationer:
Stand: 100% helt ny
Materialer: Rustfrit stål
Rørdiameter: 70 mm
Passer til:
Til BMW 3-SERIE M57 DIESEL (E90/E91/E92 2008-2012)
Til BMW 5-SERIE M57 DIESEL (E60/E61 2004-2014)
Pakken inkluderet:
1 x Rør
1 x Pakning
2 x Bolte
2 x Møtrikker/spand>
Forsendelsesoplysninger:
Leveringstid: 3-8 hverdage.
Gratis hurtig levering fra Californien.
Customer Reviews
2012-2018 Audi A6 C7/C7.5 A7 C7/C7.5 3.0T V6 Exhaust Racing Downpipes
Sounds alright make sure you have afm disabled, makes it deeper and more enjoyable but not as loud as you think it will make it. If you want loud you’ll have to do the resonator further back as well, as well as an issue of the pipe not being long enough to cut the flapper out so that’s another restriction. I welded mine open. Fit well after the muffler but the inlet pipe is a little smaller causing you to have to really tighten the exhaust clamp down to get it tight. Does not completely seal so there will be a slight leak around the edges unless you fix that with some welds or exhaust wrap/tape. But for 80 bucks it’s a good deal and the easiest way to diy it the right way.
This will take you about 20min to install. Super simple. YouTube has a great video step by step. Instructions that come with it you can't even read so don't try. Muffler shop will charge you about $150-$200 so this is much better option and if you trucks lifted it's even better.
Actually works!
Wasn’t a direct fit, but worked well with some tweaking. Also had to trim about 8” out of the middle section (comes with three sections) to meet length. One of the bends was slightly off for factory exhaust tips to align in bumper, but for the money it was fine.