2013+ 6,7L Dodge Ram Cummins 4" Taxa & Chassis DPF Slet udstødningsrør
$822.77
SKU: C138-B104
Gratis og hurtig levering
Sikker og pålidelig handel
Funktion:?
Det fjerner behovet for regelmæssig service af DPF'en (rengøring, udskiftning)
En DPF-sletning vil fjerne muligheden for en DPF-fejl, som kan forårsage dyre dieselreparationer
På grund af mindre udstødningsmodtryk øger DPF-deleteringen udstødningsstrømmen og dermed din motors ydeevne!
Kombineret med en ECU-omlægning er det bevist, at DPF-sletningen øger effekt og drejningsmoment for alle køretøjer
Specifikationer:
Stand: 100% helt ny
Materiale: Rustfrit stål
Indløbsdiameter: 4"
Montering:
Til 2013-OP 6,7 Dodge Ram Cummins Cab & Chassis
Pakken indeholder:
5x Rør
3x klemmer
Forsendelsesoplysninger:
Gratis hurtig levering.
Forventet ankomsttid: inden for 3-6 arbejdsdage.
Customer Reviews
2003-2008 Nissan 350Z Coupe/Convertible 3" Exhaust Pipe Drift Spec
Have already sent a email but now just being ignored
2012-2018 Audi A6 C7/C7.5 A7 C7/C7.5 3.0T V6 Exhaust Racing Downpipes
Sounds alright make sure you have afm disabled, makes it deeper and more enjoyable but not as loud as you think it will make it. If you want loud you’ll have to do the resonator further back as well, as well as an issue of the pipe not being long enough to cut the flapper out so that’s another restriction. I welded mine open. Fit well after the muffler but the inlet pipe is a little smaller causing you to have to really tighten the exhaust clamp down to get it tight. Does not completely seal so there will be a slight leak around the edges unless you fix that with some welds or exhaust wrap/tape. But for 80 bucks it’s a good deal and the easiest way to diy it the right way.
This will take you about 20min to install. Super simple. YouTube has a great video step by step. Instructions that come with it you can't even read so don't try. Muffler shop will charge you about $150-$200 so this is much better option and if you trucks lifted it's even better.
